What property of a compound light microscope enables a person to change objectives without major focusing adjustments?
September 16, 2022
What property of a compound light microscope enables a person to change objectives without major focusing adjustments?Question1 of 25What property of a compound light microscope enables a person to change objectives without major focusing adjustments?Resolving powerMagnificationParfocalFocusingResolutionQuestion2 of 25How does closing the iris diaphragm affect image brightness and contrast?Decreases bothIncreases bothDecreases brightness and increases contrastIncreases brightness and decreases contrastDecreases brightness but has no effect on contrastQuestion3 of 25Which of the following objectives has the shortest working distance?4X10X45X100XQuestion4 of 25What effect will changing from the low power objective to the high power objective have on the field of view of a specimen?IncreaseDecreaseNo effectQuestion5 of 25If the letter p is placed under the microscope in the normal reading position, which of the following orientations of the letter would the viewer see?bpqdQuestion6 of 25Which of the following procedures should be done just prior to adjusting the diopter, when using the compound microscope?Clean all lenses with lens paperTurn the light onAdjust the iris diaphragmAdjust the fine focusQuestion7 of 25Two parts of the microscope that regulate the amount of light visible through the ocular are thefine and coarse adjustment knobs.ocular and objective lenses.illuminator and revolving nosepiece.condenser and iris diaphragm.Question8 of 25Initial focusing of any slide is done under thescanning or low power objective.high power objective.oil immersion objective.depends upon the size of the specimen.Question9 of 25Under which magnification would the distance between the objective and the specimen being observed be the least?40X100X450X1000XQuestion10 of 25What is the total magnification produced by a microscope, using a 10X ocular lens and a 10X objective lens?10X20X100X1000XQuestion11 of 25Which of the following describes proper microscope care and technique?Be sure to carry the microscope upright, with one hand on the arm and the other under the base.To protect the optics of the microscope, place it down gently and donÂ’t drag it across the tabletop.Always begin focusing with the lowest power lens available.Only use the coarse focus knob with the scanning and low power lenses.All the above are examples of correct microscope care and technique.Question12 of 25Turning which of the following knobs moves the objective lenses the greatest vertical distance?Coarse focus knobFine focus knobQuestion13 of 25Resolution is the ability to see two objects as separate.TrueFalseQuestion14 of 25Which of the following regulates the amount of light passing through the slide specimen on the microscope stage?NosepieceObjective lensIris diaphragm leverFine focus knobQuestion15 of 25An increase in magnification causesa decrease in the field of view.a decrease in the working distance.a decrease in the depth of field.all of the above.Question16 of 25Working distance is thedistance from your house to your job.distance the microscope nosepiece travels using the coarse focus knob.distance from the bottom of the objective lens to the specimen.distance the specimen can travel across the microscope stage.Question17 of 25When adjusting a binocular microscope for differences between right and left eyes, focus the microscope with the fine adjustment while viewing only with the right eye (fixed ocular).TrueFalseQuestion18 of 25When using the oil immersion lens, you should raise the objective lenses for easy application of an oil droplet to the slide.TrueFalseQuestion19 of 25Why must a small object seen through the ocular lens be centered in the field of view before changing to a higher power objective lens?To prevent damage to the objective lensTo compensate for the decrease in resolving power of the lensTo prevent its disappearance due to the decrease in the field of viewTo prevent eyestrainQuestion20 of 25A parfocal microscope allows you to quickly focus using the low power or scanning lens and then switch to a higher power lens with only a minimal adjustment of the fine focus knob.TrueFalseQuestion21 of 25Why is it necessary to adjust the amount of light after changing objective lenses?Higher magnification lenses require more light.Proper lighting is needed to see specimen details.The lens aperture decreases with higher magnification lenses.All of the above.Question22 of 25Which objective would you use to locate a specimen on a slide?Lowest power availableHigh powerOil immersionAny of the objectives could be used with equal successQuestion23 of 25Which of the following parts of the microscope would increase the depth of field?OcularHigh power objectiveFine focusLow power objectiveQuestion24 of 25Depth of field is best demonstrated witha slide showing the letter e.a slide containing overlapping threads.the light turned completely off.the oil immersion lens.Question25 of 25When the letter e slide is viewed with the microscope, it appearsright side up.right side up and backwards.upside down.upside down and backwards.
Trust your assignments to an essay writing service with the fastest delivery time and fully original content.